DISPOZITIV INTERFATA PENTRU PC SHIMANO SM-PCE02 Plată sigură

The Shimano PC Interface / Linkage Device SM-PCE02-B for E-Bike STEPS and Di2 groups. Can be connected directly to the computer for maintenance. Improved the quality for the communication against noise and easy checking function for current leakage. SM-PCE02 connects through a Micro USB port.

Features – Shimano SM-PCE02-B Functions

• Connection check – The function is to check that each unit is connected correctly and is recognized by PC
• Customize – This function allows you to customize the global functions and operations of the system to suit your needs
• Error check – When a single unit or multiple units are connected, this function checks their operation and identifies any units which have a problem. However, this does not mean that all such problems can be discovered. In addition, the function does not fix any problems which are discovered
• Update firmware – This function is used to update the firmware for each unit. (The firmware is downloaded via the Internet)
• Preset – This function allows you to connect one or more units and read or write all the settings of those units at a time. The readout settings can be saved in a file. The settings can also be successively written to multiple bicycles
• Unit log acquisition (only for E-Bike category) – Acquires various kinds of data from the units and display it in a report format. In the report, you can check the settings of each unit and the battery status
• Complete Setup Disconnect the unit from the computer. The unit may not operate properly before this operation is completed. Even when E -TUBE PROJECT is exited, the connection to the PC is disconnected

Scope of delivery:

• 1 x PC Shimano Interface SM-PCE02-B for STEPS & Di2
• 1 x USB cable
• 1 x PC link cable (EW-SD50 type)
• 1 x PC link cable (EW-SD300 type)